Operation control mode of desulfurization system with combining stack and cooling tower into one without bypass gas duct 烟塔合一脱硫系统设计无旁路的运行控制方式
The flue gas distributions in the rectangular gas duct of electrostatic precipitator used in a power plant are simulated numerically by CFD. 应用CFD软件对某电厂电除尘器进口矩形烟道内气流分布进行数值模拟。
Analysis and Calculation of Structure Strength of Hot Gas Duct in HTR-PM HTR-PM热气导管结构强度的分析与计算
Alloy Steel Backing Design of Inlet Flue Gas Duct of FGD Absorber and Welding Technique Analysis 烟气脱硫吸收塔入口烟道合金钢贴衬设计选型及焊接工艺分析
The material weight of circular flue gas duct is much less than rectangle's. 较常规方形烟道来说,该项目圆形烟道的材料量明显降低。
The operation of no gas bypass in FGD for the 300 MW unit with gas duct and cooling tower integration 300MW烟塔合一机组取消烟气旁路湿法脱硫系统的运行
Modelling study on gas velocity deviation in gas duct of wg-200 MW Boiler WG-200MW机组锅炉烟道内气体速度偏差的模化试验研究
Study on Influence of Wet Method Desulphurization System on Boiler Tail Flue Gas Duct and Stack 湿法脱硫系统对锅炉尾部烟道和烟囱影响的研究
The deposition of graphite dust in heat gas duct of 10MW high temperature gas-cooled reactor ( HTR-10) was analyzed. The deposition efficiency of graphite dust in heat gas duct was obtained, which was necessary to estimate the radioactivity activity at the surface of heat gas duct. 分析了10MW高温气冷堆(HTR-10)中的石墨粉尘在热气导管中的沉积情况,得到了石墨粉尘在热气导管中的沉积率。
Application of High Temperature Plastic Refractory in the High Temperature Gas Duct of Boiler 高温耐火可塑料在锅炉高温烟道中的应用
Development on Devices Against Ash-piling in Circular Gas Duct in Coal-fired Power Plant 燃煤电厂圆形烟道防止积灰装置的开发研究
Energy saving in the design of regenerator flue gas duct for FCC unit 催化裂化装置再生烟气管道设计的节能分析
Study of influence of the model of stacking products and the design of gas duct on temperature and fluid fields in shuttle kiln 梭式窑的码坯方法和烟道设计对温度场及流场影响的探讨
The corrosion environment includes the gas-gas exchanger, gas duct, absorber where the gas flue pass through. 腐蚀环境包括烟气换热器、烟道、吸收塔等烟气流经之处。
Based on the result of the furnace aerodynamic test and operating adjustment, the effect of using biased secondary air on reduction of boiler waterwall slagging and temperature deviation in horizontal flue gas duct are described. 根据锅炉炉内冷态空气动力场试验及热态运行观察调整结果,分析燃烧器采用偏转二次风对减轻锅炉炉膛水冷壁结焦及减少炉膛出口水平烟道左右烟温偏差的作用。
Integrated intermediate heat exchanger ( IHX) and steam generator ( SG) can decrease a pressure vessel and a hot gas duct, as well, increase safety features and economy features. 中间换热器和蒸汽发生器一体化设计,减少了一个壳体和一个热气导管,提高了安全性和经济性。
The calculation results revealed that the deposition amount of graphite dust in heat gas duct was small due to the large flow velocity of helium in heat gas duct. 计算结果发现,石墨粉尘在热气导管中的沉积量非常小,其主要原因是氦气的流速较高。
Experimental Studies of Airflow Velocity Deviation Characteristics at Flue Gas Duct Effected by Residual Rotation at Outlet 残余旋转对烟道气流速度偏差特性的影响
In circular firing system, residual rotation of airflow at furnace outlet is the main reason for gas temperature deviation between two sides of furnace outlet and horizontal gas duct. 四角切圆燃烧锅炉炉膛出口气流的残余旋转,是形成炉膛出口和水平烟道两侧烟温偏差的重要原因,可造成高温受热面热偏差和超温爆管。
Design Features on Flue Gas Duct of FDG Project in Dingzhou Power Plant 定洲电厂脱硫工程中烟道设计的特点
Helium test loop and test section of hot gas duct 氦气试验回路和热气导管性能试验装置
Analysis of cracking of gas expander inlet flue gas duct and Revamp 烟气轮机入口烟气管道裂纹分析及改造
A Microwave System for Measuring Unburnt Carbon of Fly Ash in Boiler Flue Gas Duct 烟道式锅炉飞灰微波测碳系统开发与应用
The problems of low intensity and air leakage were solved through reforming the structure of gas duct. 通过对烟风道的结构改造解决了强度低、运行漏风的问题。
Real time data measuring and protecting system for hot gas duct test of HTR 10 HTR-10热气导管试验参数测量采集和保护系统
As an example the hot gas duct of SPEY engine is computed by using this method. 应用这种方法,以斯贝发动机燃气导管为例进行了计算。
Study on pressure behavior in horizontal flue gas duct of tangentially fired boiler after biasing sh panels 分隔屏偏置后四角燃烧锅炉水平烟道的压力特性研究
Measurement and analysis of flue gas temperature in three-stage superheater flue gas duct of boiler No.2 at Zhuhai Power Plant 珠海电厂2号炉三级过热器烟道烟气温度测试与分析